In the construction of the wall, many tools are inevitably used, so what tools are there in the wall groove? Follow the editor to see.

When using a wall slotting machine, it is generally composed of a main machine and an auxiliary machine. The main machine is responsible for the wall slotting construction, and the auxiliary machine is used to clean the dust. Compared with the electric chisel, the wall slotting machine is more efficient and can complete the slotting work at one time.

wall grooving process

First, list the positions and quantities of switches, sockets, and network cables needed in each room in advance, and then tap and wire them according to the marked positions. Put on gloves, take out the wall slotting machine, slot along the previously marked line, and check after slotting to see if there is a wrong position.

Notes on wall grooving

1. Do not slot horizontally on the load-bearing wall. After slotting, the wall is no longer a whole. In terms of overall structure and earthquake resistance, it will cause safety hazards to the wall or the entire house.

2. Pay attention to the thickness and depth when slotting horizontally. The slotting on the wall must be parallel or vertical as required. It must be kept at a height of sixty to ninety centimeters from the ground, and the depth must be four centimeters thick.

3. The depth of the groove on the wall should be the same, the groove line should be straight, and the line should be played on the wall first, and the groove should be manually grooved with a marble cutting machine. After the installation is complete, seal all the grooves, wait for the grooves and the ground to be filled with slag, clean the ground and wall, and wait until the water is dry before waterproofing.

Repair after wall grooving

First, clean up all the debris, pour the mixed cement into the tank to fill, and then use a scraper to level it. After the cement is dry, do the basic grinding, clean the dust after grinding and leveling, brush the surface with waterproof putty, and brush the second time after the previous putty is dry, and then use the wall paint to paint when the waterproof putty is dry.